10MBd digital CMOS optocoupler draws less than 18mW, insulated to 5 kV
July 05, 2012 // Julien Happich
The ACNW261L ultra low power 10 MBd digital CMOS optocoupler from Avago Technologies draws less than 18mW and comes with a reinforced insulation working voltage of 1414 VPEAK.
Supply current is under 1.5mA over the –40 to 105°C temperature range. Both 3.3 V and 5.0 V applications are supported. The input LED current was designed to be a low 4mA. The ACNW261L features input-to-output insulation voltage of 5000 VRMS. With reinforced insulation the new optocoupler meets the IEC 607475-5-5 working voltage requirement of 1414 VPEAK, internal clearance of 1mm, external creepage of 10mm and external clearance of 9.6mm. By using an internal Faraday shield the ACNW261L has excellent common mode transient rejection performance of 20 kV/µs minimum, 35 kV/µs typical, at 1000 V common mode voltage.
An enable pin sets the CMOS output stage to a high impedance state for bus interface versatility. Slew rate controlled output ensures stable rise and fall times over temperature and operating conditions, an especially important feature for parallel interface applications. The ACNW261L operates from 3.3 V or 5.0 V power supply voltage. Applications for the new 10 MBd optocouplers include CANBus, RS232, RS485, I2C, digital Fieldbus, and analog-to-digital and digital-to-analog converter interfaces. By meeting medical equipment standard IEC 60601-1 rev 3 requirements, medical equipment suppliers can also use the new ACNW261L digital optocoupler with 1 mm internal clearance.
Visit Avago Technologies at www.avagotech.comAll news
Tower makes IR sensor for Intel RealSense
March 04, 2015
Foundry Tower Semiconductor Ltd., which trades as TowerJazz, has begun mass production of a near infrared light sensor used ...
Polymer blend improves solar cell efficiency by 200 percent
Stress tracker tames drivers
Glass coated cathode promises lithium-sulfur battery performance gains
Femtocell improves in-car mobile connectivity
Study: Autonomous driving changes cities and auto industry
March 03, 2015
The driverless car will have a disruptive effect on the automotive industry as we know it. A study from management consulting ...
Cisco, Deutsche Telekom and Intel to help IoT startups
Opinion: The NXP/Freescale takeover and automotive electronics
Parrot takes instant 3D mapping to the sky
- High Performance Portable DC Bench Power Supply: Save Money and Free Up Bench Real Estate by Building Your Own
- Software-Defined Radio Handbook
- A Four-Quadrant DC/DC Switching Regulator Smoothly Transitions from Positive to Negative Output Voltages for FPGA and Other Applications
- LED Driver with Integrated Spread Spectrum Reduces EMI without Adding Flicker
InterviewInfineon: CAN FD success goes at the expense of FlexRay
The faster version of the venerable CAN bus, CAN FD is currently taking off at several carmakers. Infineon's Thomas Böhm, Head of Body / Automotive, believes this could well go at the expense of FlexRay. ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
To ensure you have a good start in 2015, Freescale is giving away five of its QorIQ TWR-LS1021A Tower system modules, worth USD269 each, for EETimes Europe's readers to win.
The module is the most feature-rich and high-performance Tower system offered by Freescale, enabling compatibility and interoperability with the growing list of Tower expansion modules, offering an easily accessible...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.