3.3-V, 20-A (66-W) 2:1 input 16th brick DC-DC converter delivers high performance benefits
The open frame module provides a full 66 W of 3.3 V power @ 55C & 200lfm of airflow – ideal for distributed power architecture applications or as a fully regulated intermediate bus converter. The module is compliant with DOSA footprint and interface standards and has a wide input voltage range of 36 to 75 VDC & provides 2250 VDC input to output isolation.
The CPT20F48 is a high efficiency module with efficiencies exceeding 90% from ½ load through full load. The module meets EN 60950 basic insulation requirements and is UL94 V-0 flammability rated. The module complies with all of the typical industry requirements including no load operation, 100 V/100 mS input voltage transient and pre-biased load startup.
Other features include: fixed-frequency operation, auto-restart OVP, OCP & OTP protections, UVLO, remote sense and +10%/-20% output voltage trim using industry standard equations. Remote ON/OFF is standard with positive or negative logic options available.
The module features a standard 16th brick pinout and dimensions of 1.3 inch L x 0.9 inch W (33 mm x 22.9 mm.) The device has a maximum height of 9.5 mm (0.375 inch) which accommodates tight card spacing with minimal airflow blockage of downstream components.
Visit Semiconductor Circuits at www.dcdc.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
