4-terminal, snap-in power aluminium capacitors deliver 10,000-hours of useful life
July 16, 2010 // Julien Happich
Vishay Intertechnology launched a new series of 4-terminal, snap-in power aluminium capacitors with voltage ratings from 350 V to 450 V and a long useful life of 10,000 hours at + 85 °C in 17 large case sizes.
The 095 PLL-4TSI capacitors feature a cylindrical aluminium case insulated with a blue sleeve and pressure relief, while a four-terminal design provides increased mechanical stability and keyed polarity.
The devices are available in case sizes ranging from 35 mm by 50 mm to 45 mm by 100 mm. With larger case sizes than standard snap-in devices, the 095 PLL-4TSI series offers high capacitance/voltage combinations, from 390 µF at 450 V to 2,200 µF at 350 V, which until now have been normally offered only in capacitors with screw terminal terminations.
The 095 PLL-4TSI makes these combinations available for cost-sensitive applications where PC board mounting is done with a simple soldering process. The capacitors offer a high rated ripple current to 8.6 A at + 85 °C, and are lead (Pb)-free and compliant to RoHS Directive 2002/95/EC.
As polarized aluminium electrolytic capacitors with a nonsolid electrolyte, the 095 PLL-4TSI devices are suitable for DC-link capacitors on the main side of switch mode power converters. Focus end products include solar inverters, motor drives, and uninterruptible power supplies (UPS).
For applications where a 500-V rating is required, Vishay also offers the 096 PLL-4TSI series of 4-terminal, snap-in power aluminum capacitors. The devices offer a 350-V to 500-V rated voltage range, capacitance to 2,700 µF, and a useful life of 5,000 h at + 85 °C.
Get the datasheets at:
Visit Vishay Intertechnology at www.vishay.comAll news
Biodegradable electronics debut
July 03, 2015
Today our landfills are being overrun by discarded electronic devices fabricated on silicon substrates that do not biodegrade ...
Power magnetics Lab Kit enters education
Automotive software design: new challenges through multiprocessing
Ultrasound sensor protects pedestrians
Dielectric material helps keep LED packages much cooler
PowerChip plans Chinese fab for display, sensor ICs
July 02, 2015
A former DRAM vendor, now foundry, is joining a trend towards supporting manufacturing in China, according to local reports. ...
XeThru Bot simulates breathing for sensor testing: built from Lego
Sony to raise $3.6bn to speed reinvention as component company
Startup's tech is Intel's Quark neural network
- Critical Requirements in High Speed Signal Generation Applications
- The 400XAC Series: Two Major Advantages that Simplify Functional Testing
- A Smart Way to Drive ECU Consolidation
- Autonomous Driving: An Eye on the Road Ahead
InterviewCEO interview: Cadence is about enablement, collaboration
EDA companies are being asked to provide expertise from the circuit- to the system-level observes Lip-Bu Tan, CEO of EDA software vendor Cadence Design Systems Inc. Covering such a breadth of endeavour ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Novelda is giving away two full XeThru Inspiration kits worth 1499 US Dollars each, for EETimes Europe's readers to experiment first hand with its XeThru technology.Based on the use of radio waves, rather than infrared, ultrasound or light, the company's X2M1000 Inspiration modules can detect presence just from the chest movement while breathing, and measure both the rate and... MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.