Communications between a plug-in EV and the EV supply equipment
April 04, 2012 // Don Shaver, Texas Instruments // 0 commentsDownload White Paper 236Ko
Texas Instruments (TI) leading power line communications (PLC) technology has enabled Cygnus Electronics to create a PLC hardware and software platform designed for automotive qualification in electric vehicles. Auto-rem implements the Society of Automotive Engineers’ (SAE) J2931-3 specification, which is a narrowband orthogonal frequency division multiplexing (OFDM) proposal for plug-in electric vehicle (PEV) to electric vehicle service equipment (EVSE) communications during PEV battery charging. J2931-3 is based on the upcoming IEEE P1901.2 international narrowband OFDM standard. The auto-rem system uses a TI PLC chipset comprised of an optimized OFDM C2000™ Piccolo™ microcontroller (TMS320F28069) and an integrated analog front end AFE031, which integrates more than 100 discrete devices.
Most popular PapersRead more
Flexible Performance for Network Security Appliances
August 30, 2014 | Pomah Yen, Chief Product Manager, CASwell Inc., a Subsidiary of Portwell | 222922199
Building Blocks for the Internet of Things
August 01, 2014 | Kumar Balasubramanian, Intelligent Solutions, Intel® Corporation | 222921947
- Putting FPGAs to Work in Software Radio Systems Handbook
- Smartphone SoC Power Efficiency - DVFS Capacitor Switching
- Flexible and Low Power Driving of Solenoid Coils
- How to Protect & Monetize Android Apps
InterviewCEO interview: AMS' Laney on driving a sensor-driven business
Kirk Laney, CEO of Austrian mixed-signal chip and sensor company AMS, wants to leverage the opportunity that technology affords to create new markets for sensors and sensor interfaces.
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Trinamic Motion Control is offering you to win one of four TMCM-1043 development kits for its highly integrated, NEMA 17-compatible TMCM-1043 stepDancer stepper motor module.
Offering designers an easy-to-use PC-based GUI that allows one-click modification of motor drive current, micro-stepping and other key parameters, the intuitive kits are custom designed and developed for direct mounting on a NEMA 17 motor. Pre-programmed and pre-configured with all operating parameters to support standard 1.5A (peak) motors, the TMCM-1043 board uses Trinamic´s single-axis TMC2660 stepper motor driver IC, which integrates a motor pre-driver and power MOSFETs.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.