3-mm lens high-speed PIN photodiodes in clear- and black-epoxy T1 plastic
March 01, 2012 // Julien Happich
Vishay Intertechnology has extended its optoelectronics portfolio with the introduction of high-speed silicon PIN photodiodes with high radiant sensitivity and fast switching times in clear- and black-epoxy T1 plastic packages. Offering 3 mm lenses, the TEFD4300 and TEFD4300F feature a high reverse photo current of 17 µA and a ± 20° angle of half sensitivity.
For infrared and visible light sources, the TEFD4300 is a clear epoxy device with a sensitivity range of 350 nm to 1120 nm. For light sources in the infrared wavelength range of 770 nm to 1070 nm, the TEFD4300F is a black epoxy device with a daylight blocking filter matched with 850 nm to 950 nm IR emitters. The photodiodes offer fast switching times down to 10 ns at low load resistor values, a low 0.1 %/K temperature coefficient of light current, temperature range of −40 °C to + 100 °C, and a 950 nm wavelength of peak sensitivity.
The devices are package matched with the VSLB3940, TSUS4300, and TSAL4400 IR emitter series. The photo detectors support lead (Pb)-free processing in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC, and conform to Vishay "Green" environmental specifications.
Visit Vishay Intertechnology at www.vishay.com
SMIC to report Tunnel-FET extension to CMOS
October 08, 2015
Chinese foundry Semiconductor Manufacturing International Corp. has manufactured complementary Tunnel FETs (C-TFETs) that ...
Moroccan camera packager to exit market, auction equipment
Dresden's chilling evening stroll
Sony acquires SoftKinetic for ranging technology
Next-gen ADAS focuses on urban driving
Chip market decline accelerated in August, says ESIA
October 08, 2015
The three-month average of global chip sales for August declined by 3 percent in comparison with the same month a year ago, ...
Standardisation of vehicle data makes progress
NFC concrete slabs for a smart city
Update: IMEC, Cadence tape out first 5nm test chip
- Determine Balancing Current for the LTC3305 Lead-Acid Battery Balancer
- 3 Ways to Simplify Medical Device Testing
- Thread Networking Protocol Simplifies Connecting “Things” in the Home and Beyond
- High Voltage CMOS Amplifier Enables High Impedance Sensing with a Single IC
InterviewMEMS platforms are way to go, says Bosch's Finkbeiner
In the two years since we last interviewed Stefan Finkbeiner, CEO of Bosch Sensortec, the company has taken over from STMicroelectronics as the leading global supplier of MEMS components. Here he explains ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, LabNation is giving away three of its SmartScope open source USB oscilloscopes, worth 229 Euros each, for EETimes Europe's readers to win.
Successfully funded through Kickstarter last year, the SmartScope is claimed to be the world's first test equipment designed to run on multiple operating systems and platforms such as smartphones, tablets and PCs. It is powered directly from... MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.