Print  |  Send  |   

Analog Devices integrates two bucks regulators and two LDOs in smaller PMICs

July 20, 2011 // Paul Buckley

Analog Devices integrates two bucks regulators and two LDOs in smaller PMICs

Analog Devices, Inc. has introduced the ADP5034 regulator/LDO, a highly integrated power management IC that combines two 3-MHz, high efficiency, 1.2-A step down regulators with two 300-mA LDO regulators in a small LFCSP package. The company is also introducing the ADP5024 regulator/LDO, which is identical to the ADP5034 but features a single 300-mA LDO regulator.


Occupying a total board area of only 69mm2, the ADP5034 and ADP5024 step-down regulators/LDOs are designed to meet the shrinking board space and increasing performance requirements of processors and FPGAs.

The integrated step-down regulators are used 180 degrees out of phase to reduce input filtering, which allows smaller input capacitors to be used while reducing input noise. A dedicated mode pin places both regulators in forced PWM operation or auto PWM/PSM operation for higher efficiency. The low quiescent current, low dropout voltage, and wide input voltage range of the ADP5034 and ADP5024 also enable more efficient power management. The integrated LDOs feature high 65-dB PSRR (power-supply rejection ratio) performance that ranges from 1 kHz to 10 kHz, lowering output noise to 80 μV/rms for powering sensitive analogue circuitry.

The ADP5034 and ADP5024 step down regulators/LDOs are flexible, highly integrated power management components that can be used in applications including USB-powered portable devices, handheld medical products and multi-voltage power applications for processors, ASICs, FPGAs and RF chipsets.

Each component has dedicated enable pins for each of the step down regulators and LDOs and supports adjustable output voltages on all four regulator outputs, allowing the output voltages to be easily set using an external resistor divider network. Adjustable output voltage allows the ADP5034 and ADP5024 to be easily and quickly modified to work with different output voltage requirements, which reduces design time and time to market. The ADP5034 and ADP5024 are fully specified over the junction temperature range of −40 °C to 125 °C and both are available in a 24-lead, 4 mm × 4 mm LFCSP packages.

The ADP5024 is available now packaged in a 4 mm x4 mm 24-lead LFCSP and will be in full production in August 2011. The device is priced at $1.79 per 1k units.

The ADP5034 is available now packaged in a 4 mm x4 mm 24-lead LFCSP. The device is priced at $1.99 per 1k units.

More information about the ADP5034 regulator/LDO at
www.analog.com/ADP5034.

More information about the ADP5034 regulator/LDO at
www.analog.com/ADP5024.

All news

Power components

Follow us

Fast, Accurate & Relevant for Design Engineers only!

Technical papers     

Linear video channel

READER OFFER

Read more

This month, Arrow Electronics is giving away ten BeMicro Max 10 FPGA evaluation boards together with an integrated USB-Blaster, each package being worth 90 Euros, for EETimes Europe's readers to win.

Designed to get you started with using an FPGA, the BeMicro Max 10 adopts Altera's non-volatile MAX 10 FPGA built on 55-nm flash process.

The MAX 10 FPGAs are claimed to revolutionize...

MORE INFO AND LAST MONTH' WINNERS...

Design centers     

Automotive
Infotainment Making HDTV in the car reliable and secure

December 15, 2011 | Texas instruments | 222901974

Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.

 

You must be logged in to view this page

Login here :