MENU

Cheap fusion beats fossil fuels

Cheap fusion beats fossil fuels

Technology News |
By eeNews Europe



Fusion reactors offer the possibility of unlimited green power, being based on the same principles that make the sun shine. Instead of fission reactors that produce massive amounts of radioactive waste that must be stored for thousands of years, fusion reactors produce only a small amount of much less dangerous nuclear waste that only has to be stored for 10 years. Fusion reactors also do not present the danger of a melt down. Sutherland’s and Jarboe’s low-cost fusion reactor design will be presented at the International Atomic Energy Agency’s Fusion Energy Conference in St. Petersburg, Russia on October 17, 2014.

The Sun is a natural fusion reactor, the most powerful energy source in the universe.
(Image: NASA, Goddard Laboratory for Atmospheres)

The Sun is a natural fusion reactor, the most powerful energy source in the universe. (Image: NASA, Goddard Laboratory for Atmospheres)

The design, called a spheromak, began as a class project by professor Thomas Jarboe, but had not been proven a viable design until a prototype called the Dynomak was recently built by Jarboe and doctoral candidate Derek Sutherland, who had previously worked on reactor designs at the Massachusetts Institute of Technology (MIT).

The standard approach to fusion reactors today, exemplified by the joint Chinese, European Union, India, Japan, Korea, Russia, and US collaboration called the International Thermonuclear Experimental Reactor (ITER) in Saint-Paul-lès-Durance, France, is akin to using brute force compared to the more elegant Dynomak design invented at University of Washington.

"We eliminated the need for the expensive superconducting toroidal field coil set like the ITER in France requires, enabling us to make a much more compact reactor system that reduces the cost by a factor of 10 while increasing the output by a factor of five," Sutherland told EE Times. "The spheromak design generates twisted magnetic fields which drive a current in the plasma — which is a really good conductor — thereby confining and stabilizing the super-hot plasma in the reactor. A voltage transferred using induction generates these magnetic fields to achieve confinement and stability."

The University of Washington's current fusion experiment, HIT-SI3, is about one-tenth the size of the gigaWatt power-producing Dynomak that beats fossil fuels in energy efficiency.
(Image: University of Washington)

The University of Washington’s current fusion experiment, HIT-SI3, is about one-tenth the size of the gigaWatt power-producing Dynomak that beats fossil fuels in energy efficiency.
(Image: University of Washington)

The current Dynomak prototype uses three toruses to helicity inject those confining and stabilizing currents into the plasma, however it does require a single coil in a feedback loop to maintain equilibrium inside the reactor during steady-state operation. Once power from the grid starts up the fusion reactions inside, a certain fraction of the power produced by the reactor generates the voltage for the toruses and coil that keeps it going in a steady state. It will take about about 73 megaWatts to keep the final gigaWatt Dynomak running in a steady state.


The current prototype is officially called the helicity injected torus steady inductive three (HIT-SI3), because it has three torus injectors. The next prototype — appropriately called the (HIT-SIX) — will be twice as big as HIT-SI3 (which is about three meters across) and will test whether the principles of the spheromak design with with six torus injectors will work with the higher temperature plasmas in the final Dynomak.

"If we can show that it works, then the rest of the development of the full-scale Dynomak will be relatively low risk," Sutherland told EE Times.

It will cost about $8 million to $10 million to build HIT-SIX, which the researchers are soliciting now. It will be a scaled down version with all the subsystems required for the full scale Dynomak, which will generate a gigaWatt of power for the grid.

According to the researchers it will cost about $2.7 billion to build a gigaWatt Dynomak power plant that produces no greenhouse gases, compared to $2.8 billion for a environmentally unfriendly coal-fired plant of the same output.

The team has filed patents on its design. Other collaborators at the University of Washington included fellow professor Brian Nelson in electrical engineering, post-doctoral researcher, Brian Victor who has already graduated and graduate students George Marklin, Chris Hansen, Michael Pfaff, Kyle Morgan, Eric Lavine, Michal Hughes, and Aaron Hossac along with Yu Kamikawa and Phillip Andrist formerly of the University of Washington.

Funding was provided by the US Department of Energy.

— R. Colin Johnson, Advanced Technology Editor, EE Times

Related articles:
Cold fusion confirmed, claim U.S. Navy researchers

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s