Digital voice scrambler for analog radio systems offers secure voice communication
May 04, 2012 // Paul Buckley
CML Microcircuits has released a new digital voice scrambler for analog radio system. The CMX7011 is a flexible, half duplex, digital voice processor specifically designed to implement a digital voice scrambler for use with conventional radio communication systems.
The scrambler can also be used with analog professional mobile radio, wireless door access and gate entry systems.
The need for secure voice communication has become an important requirement for wireless communication. With new communication systems moving towards the digital domain which inherently provides voice security, the widely-used legacy analog systems are being left behind. A number of analog voice privacy systems are available today, based on frequency inversion techniques that provide a level of security. In many applications higher levels of voice security are required whilst remaining on lower-cost, widely available analogue radio systems.
Digital scrambling is the answer, providing the highest level of voice security and the advantage of digital voice. The CMX7011 provides the solution with an embedded state-of-the-art, low-cost, low-bit rate Vocoder combined with a robust audio-band voice data modem.
The device allows simple implementation and configuration within existing designs and is intended to be added to a radio via an accessory port or ‘feature socket’. The CMX7011 offers good quality speech and, using the internal digital scrambling algorithm, significantly higher levels of security are achieved.
Built in to the CMX7011 is CML's proven and reliable RALCWI (Robust Advanced Low Complexity Waveform Interpolation) vocoder providing near toll quality speech at low bit rates. The CMX7011 also offers ‘instant voice capture’, featuring push-to-talk (PTT) buffering eliminating clipping in PMR applications. New features and enhancements to existing functions may be provided in future, via Function Images, expanding the capabilities of the device.
The CMX7011 operates at 3.0 V to 3.6 V and comes in a 48-pin LQFP or VQFN package.
Visit CML at www.cmlmicro.com
Bosch suggests cars to coast for fuel efficiency
December 11, 2013
With a package of relatively simple but coordinated measures, cars can raise their fuel efficiency. Automotive supplier Bosch ...
Europe is giving up on leading edge digital chip design
Design-free RF-based wireless charging redefines user experience
Electromobility, Formula One and the Fatal Consequences of Bad Software Design: The top ten stories of 2013
Brushless DC servo motors integrate field-oriented closed-loop servo control
How green is your code?
December 11, 2013
Mid-November, French technology cluster Images & Réseaux was holding a one-day presentation of start-up companies at Rennes’ ...
Chinese LED lighting market to more than double to $7.4 billion in 2017, forecasts Lux Research
80V Wide Range I2C Power Monitor Simplifies Challenging System
CUI launches complete range of free 3D power supply models to speed power supply design
- 3mm × 3mm QFN IC Directly Monitors 0V to 80V Supplies
- UltraCMOS® Semiconductor Technology Platforms: A Rapid Advancement of Process & Manufacturing
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Isolated 4-Channel, Thermocouple/RTD Temperature Measurement System with 0.5°C Accuracy
InterviewPerformance monitoring solution helps provide intelligent control of high power systems
A performance monitoring solution designed to enable companies to monitor high power IGBT module systems in locomotive, wind turbine, High Voltage DC and industrial drive applications was unveiled this ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
Internet of Things (IoT) manufacturer Ciseco has launched the Raspberry Pi ‘Wireless Inventors Kit’ (RasWIK), featuring 88 pieces to provide everything a Pi owner needs to follow a series of step-by-step projects or to create their own wireless devices, without the need for configuration or even writing code.
RasWIK has been designed to be highly accessible, demystifying the dark art of wireless and enabling anyone with basic computing skills to begin building wireless devices with a Raspberry Pi. You can create anything from a simple traffic light, to a battery monitor, or even a temperature gauge that sends data to the Xively IoT cloud so billions can access the data.This month, Ciseco is giving away twelve Raspberry Pi Wireless Inventors kits, worth £49.99 each for EETimes Europe's readers to win.
And the winners are...
In our previous reader offer, Farsens was giving away five kits for EEtimes Europe readers to evaluate its FenixVortex, Kineo and X1 wireless, battery free sensor tags.
Lucky winners include Mr A. Neil from the UK, Mr. E. Delvaux from Belgium, Mr Lengal from the Czech Republic, Mr H. Bijlsma from the Netherlands, and Mr G. Pfaff from Germany. All should be receiving their packages soon. Lets wish them some interesting findings with their projects.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.