DockPort chip enables DisplayPort, USB and power over a single cable
DockPort provides a lower cost alternative to proprietary implementations and offers more features than standard USB docking stations. The HD3SS2521 controller enables DisplayPort, USB 3.0, USB 2.0 and power over a single interconnecting cable, and provides the control logic and automatic switching required on the cable’s host side and dock side.
The HD3SS2521 enables system designers to create smaller, more affordable docking stations that connect and synchronize computers with LCD monitors, dongles, keyboard/mouse, Gigabit Ethernet, storage, audio speakers, DVD/Blu-ray media player and smartphone.
The HD3SS2521’s bidirectional 2:1 switch manages DockPort detection, as well as signal and power switching. It enables display, USB, power, and computer docking interface over a single cable, which allows designers to create smaller, more affordable docking stations.
The device’s highly integrated 5-mm by 11-mm package reduces board space by one-third and BOM costs by more than 50 percent, compared to competitive implementations that provide data and A/V over a single connector.
The HD3SS2521’s bidirectional power reduces the number of connections by allowing upstream charging of host-side computers, or downstream powering of one or more dongles.
Operating in two-lane mode with USB 3.0 data, the HD3SS2521 supports one monitor with resolutions up to 4K2Kp at 30 frames per second (fps) and 30 bits per pixel (bpp), or multiple monitors with resolutions less than or equal to 1920 by 1200p at 60 fps. In four-lane mode with USB 2.0, it supports the following configurations: 1) one 4K2Kp at 60 fps and 30 bpp, 2) two 4K2Kp monitors at 30 fps and 30 bpp, or 3) four or more monitors with resolutions less than or equal to 1920 by 1200p at 60 fps.
System designers can extend DisplayPort reach, enable multiple video interfaces, and add more switching and USB SuperSpeed ports by combining the HD3SS2521 with other TI interface products. Complementary products include the SN75DP130 DisplayPort 1:2 redriver switch, SN75DP126 DisplayPort 1:2 redriver switch, SN75DP139 DisplayPort to TMDS translator, HD3SS212 DisplayPort 1.2 2-to-1 differential switch, TUSB8040A1 four-port USB 3.0 hub, and HD3SS3412 four-channel differential switch.
A reference host side evaluation module (EVM) and dock side EVM are available to accelerate DockPort system development. The HD3SS2521 HSPICE model is also available to verify host and dock signal integrity.
Availability and Pricing
The HD3SS2521 is available today in a 56-pin WQFN package for a suggested retail price of $1.85 in 1,000-unit quantities.
More information about the HD3SS2521 DockPort interface solution at
www.ti.com/hd3ss2521-pr-eu
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
