Print  |  Send  |   

Dual 500mA μPower LDO

May 01, 2012 // Molly Zhu, Linear Technology // 0 comments

Dual 500mA μPower LDO Download White Paper 302Ko

The LT3029 integrates two independent 500mA monolithic LDOs in a tiny 16-lead MSOP or 4mm × 3mm × 0.75mm DFN package. Both regulators have a wide 1.8V to 20V input voltage range with a 300mV dropout voltage at full load. The output voltage is adjustable down to the 1.215V reference voltage. With an external bypass capacitor, the output voltage noise is less than 20μVRMS. A complete power supply requires only a minimum 3.3μF ceramic output capacitor for each channel to be stable.


All White Papers


Submit a white paper

Follow us

Fast, Accurate & Relevant for Design Engineers only!

Technical papers     

Linear video channel

READER OFFER

Read more

This month, Freescale is giving away 5 RIoTboards, worth 74 dollars each, for EETimes Europe's readers to win.

 

Designed to run Android operating systems efficiently or to run under Linux, the board is based on the Freescale i.MX 6Solo processor; using the ARM Cortex-A9 architecture.

The RIoTboard platform also includes a rich set of peripherals including a 10M/100M/Gb Ethernet port, 1 USB 2.0 OTG High Speed and 4 USB 2.0 High Speed 2.0 Hosts, LVDS, HDMI and Parallel RGB interfaces, micro TF and SD card interfaces, analog headphone/microphone jacks, camera interface, serial ports, JTAG and boot configuration interfaces. This together with a low power consumption makes it fit for the design of IoT data hubs.

MORE INFO AND LAST MONTH' WINNERS...

Design centers     

Automotive
Infotainment Making HDTV in the car reliable and secure

December 15, 2011 | Texas instruments | 222901974

Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.

 

You must be logged in to view this page

Login here :