Print  |  Send  |   

Dual 500mA μPower LDO

May 01, 2012 // Molly Zhu, Linear Technology // 0 comments

Dual 500mA μPower LDO Download White Paper 302Ko

The LT3029 integrates two independent 500mA monolithic LDOs in a tiny 16-lead MSOP or 4mm × 3mm × 0.75mm DFN package. Both regulators have a wide 1.8V to 20V input voltage range with a 300mV dropout voltage at full load. The output voltage is adjustable down to the 1.215V reference voltage. With an external bypass capacitor, the output voltage noise is less than 20μVRMS. A complete power supply requires only a minimum 3.3μF ceramic output capacitor for each channel to be stable.


All White Papers


Submit a white paper

Follow us

Fast, Accurate & Relevant for Design Engineers only!

Technical papers     

Linear video channel

READER OFFER

Read more

This month, Arrow Electronics is giving away ten BeMicro Max 10 FPGA evaluation boards together with an integrated USB-Blaster, each package being worth 90 Euros, for EETimes Europe's readers to win.

Designed to get you started with using an FPGA, the BeMicro Max 10 adopts Altera's non-volatile MAX 10 FPGA built on 55-nm flash process.

The MAX 10 FPGAs are claimed to revolutionize non-volatile integration by delivering advanced processing capabilities in a low-cost, instant-on, small form factor programmable logic device.

MORE INFO AND LAST MONTH' WINNERS...

Design centers     

Automotive
Infotainment Making HDTV in the car reliable and secure

December 15, 2011 | Texas instruments | 222901974

Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.

 

You must be logged in to view this page

Login here :