Europe launches grid-connected renewable energy storage project
July 24, 2012 // Anne-Françoise PELE
A consortium of seven European partners has been formed to build a solid state hydrogen storage facility that will balance power supply and demand of renewable energy installed in the Puglia region of Italy.
Coordinated by Engineering Ingegneria Informatica, Italian ICT provider, the Ingrid project gathers regional authority ARTI, Italian electricity distributor Enel Distribuzione, electrolyser manufacturer Hydrogenics, French hydrogen storage specialist McPhy Energy; and two research institutions, RSE in Italy and TECNALIA in Spain.
The Ingrid project aims to combine solid-state high-density hydrogen storage systems and electrolysis with advanced ICT technologies for smart distribution grids monitoring and control in a scenario of high penetration of renewable energy sources so as to balance power supply and demand, partners said.
Partners said they expect to design, build, deploy and operate a 39 MWh energy storage facility in the Italian region of Puglia using McPhy's hydrogen-based solid state storage and Hydrogenics' electrolysis technology and fuel cell power systems.
The Puglia region has an installed base of over 3,500 MW of solar, wind and biomass energy systems. The solid state hydrogen energy storage installation is claimed to be able to safely store more than 1 ton of hydrogen and to include a fast responding 1.2 MW hydrogen generator. The installation is expected to provide effective and smart balancing support for the local grid managed by Enel Distribuzione. Various potential value streams for the generated carbon-neutral hydrogen will be investigated, the consortium said.
The Ingrid R&D and demonstration project has an overall budget of 23.9 million euros ($29 million). It is funded with a contribution of 13.8 million euros ($16.7 million) by the European Union.
Tiny spectrometer targets IoT
December 17, 2014
Startup company NanoLambda has developed a $10 spectrometer-on-a-chip that's suitable for use on a wide range of consumer ...
Feeding scrap plastic into your designs
LG adds quantum dot technology to 4K ULTRA HD TVs
Graphene wrapper boosts lithium-sulfur battery performance
Set top boxes get smarter than TVs
Evaluating Zero-Drift Amplifier Performance
December 17, 2014
Analog applications are demanding better precision and drift performance due to improvements in data converter resolution ...
From bionic contact lenses to Li-Fi communications
Europe's largest battery-storage project goes operational in the UK
Tiny, boring engineering designs can be fun
- New life for Embedded systems in the Internet of Things
- Virtualization and the Internet of Things
- RF/Microwave Instrumentation “S” Series Amplifiers
- Application Guide to RF Coaxial Connectors and Cables
InterviewCEO interview: Bosch's IoT startup is all about the system
Thorsten Mueller, CEO of Bosch Connected Devices and Solutions GmbH (Reutlingen, Germany), has been guiding the latest startup subsidiary of Robert Bosch GmbH since 2013 when he started the initiative ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Arrow Electronics is giving away ten BeMicro Max 10 FPGA evaluation boards together with an integrated USB-Blaster, each package being worth 90 Euros, for EETimes Europe's readers to win.
Designed to get you started with using an FPGA, the BeMicro Max 10 adopts Altera's non-volatile MAX 10 FPGA built on 55-nm flash process.
The MAX 10 FPGAs are claimed to revolutionize...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.