First microwave laser to operate at room temperature
August 17, 2012 // Nick Flaherty
Scientists in the UK have developed the first solid-state MASER to operate at room temperature, paving the way for its widespread adoption.
The researchers from the National Physical Laboratory (NPL) and Imperial College London suggest that room-temperature MASERs could be used to make more sensitive medical instruments for scanning patients, improved chemical sensors for remotely detecting explosives; lower-noise read-out mechanisms for quantum computers and better radio telescopes for potentially detecting life on other planets.The microwave equivalent of a laser, masers deliver a concentrated beam of microwaves by amplifying microwaves using hard inorganic crystals such as ruby. But they have always required extreme conditions such as extremely low pressures or temperatures close to absolute zero ( -273.15°C), as well as strong magnetic fields from large magnets.
The team have demonstrated pulse masing in a solid-state device working in air at room temperature with no applied magnetic field. This could dramatically reduce the cost to manufacture and operate a MASER, which could lead to them becoming as widely used as laser technology in a wide range of applications.
"For half a century the MASER has been the forgotten, inconvenient cousin of the laser. Our design breakthrough will enable MASERs to be used by industry and consumers," said Dr Mark Oxborrow, co-author of the study at NPL.
"When lasers were invented no one quite knew exactly how they would be used, and yet the technology flourished to the point that lasers have now become ubiquitous in our everyday lives. We've still got a long way to go before the MASER reaches that level, but our breakthrough does mean that this technology can literally come out of the cold and start becoming more useful," said Professor Neil Alford, co-author and Head of the Department of Materials at Imperial College London.
The team used a completely different type of crystal, namely p-terphenyl doped with pentacene, to replace ruby and replicate the same masing process at room temperature. As a curious twist, the pentacene dopant turns the otherwise colourless p-terphenyl crystal an intense reddish pink.
The first device only works in pulsed mode for fractions of a second at a time. They aim to get it to operate continously over a range of microwave frequencies, instead of its current narrow bandwidth, which would make the technology more useful.
In the long-term, the team have a range of other goals including the identification of different materials that can mase at room temperature while consuming less power than pentacene-doped p-terphenyl. The team will also focus on creating new designs that could make the MASER smaller and more portable.
Multithreading boosts ThreadX on MIPS cores
December 06, 2013
Imagination Technologies and Express Logic have expanded their support of the ThreadX real time operating system on Imagination’s ...
UK distribution sees 5% growth in 2014
Global M2M innovations design contest
PHI Group plans acquisition Nord Energy to extend LED street lighting offering
EV market is much more than passenger cars - and it's booming
Stanene may be better than Graphene
December 06, 2013
A team of researchers led by Stanford University professor Shoucheng Zhang now have high hopes that a new material they call ...
US demand for LED lighting to grow more than 10 percent annually to 2017, reports Freedonia
Women demand different connectivity functions in the car
Advanced batteries reached $10.8bn in market value in 2012, reports Navigant Research
- 3mm × 3mm QFN IC Directly Monitors 0V to 80V Supplies
- UltraCMOS® Semiconductor Technology Platforms: A Rapid Advancement of Process & Manufacturing
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Isolated 4-Channel, Thermocouple/RTD Temperature Measurement System with 0.5°C Accuracy
InterviewPerformance monitoring solution helps provide intelligent control of high power systems
A performance monitoring solution designed to enable companies to monitor high power IGBT module systems in locomotive, wind turbine, High Voltage DC and industrial drive applications was unveiled this ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
Internet of Things (IoT) manufacturer Ciseco has launched the Raspberry Pi ‘Wireless Inventors Kit’ (RasWIK), featuring 88 pieces to provide everything a Pi owner needs to follow a series of step-by-step projects or to create their own wireless devices, without the need for configuration or even writing code.
RasWIK has been designed to be highly accessible, demystifying the dark art of wireless and enabling anyone with basic computing skills to begin building wireless devices with a Raspberry Pi. You can create anything from a simple traffic light, to a battery monitor, or even a temperature gauge that sends data to the Xively IoT cloud so billions can access the data.This month, Ciseco is giving away twelve Raspberry Pi Wireless Inventors kits, worth £49.99 each for EETimes Europe's readers to win.
And the winners are...
In our previous reader offer, Farsens was giving away five kits for EEtimes Europe readers to evaluate its FenixVortex, Kineo and X1 wireless, battery free sensor tags.
Lucky winners include Mr A. Neil from the UK, Mr. E. Delvaux from Belgium, Mr Lengal from the Czech Republic, Mr H. Bijlsma from the Netherlands, and Mr G. Pfaff from Germany. All should be receiving their packages soon. Lets wish them some interesting findings with their projects.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.