Frequency Response Analysis for Inertial MEMS in Stabilization Systems
June 04, 2012 // By Mark Looney, iSensor Application Engineer, ADI // 0 commentsDownload White Paper 547Ko
UAV-mounted surveillance equipment, maritime microwave receivers, and vehicle-mounted infrared imaging sensors are examples of instrumentation that require stable platforms for best performance, but are often used in applications that experience vibration and other, undesirable motion.
Vibration and normal movement (cars, boats, planes, etc) causes communication loss, blurry images and many other behaviors that degrade the instrument's performance and ability to provide a valuable function. Platform stabilization systems employ closed-loop control systems to actively cancel this type of motion, in order to preserve critical mission-critical performance and objectives for these instruments.
Most popular PapersRead more
Building Blocks for the Internet of Things
August 01, 2014 | Kumar Balasubramanian, Intelligent Solutions, Intel® Corporation | 222921947
- Using RF Recording Techniques to Resolve Interference Problems
- Flexible and Low Power Driving of Solenoid Coils
- How to Protect & Monetize Android Apps
- Making cars safer through technology innovation
InterviewCEO interview: Tronics' Langlois makes moves in MEMS
Pascal Langlois has been CEO at Tronics for nine months. He discusses plans for the company and directions for the complex and diverse MEMS technology sector.
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Trinamic Motion Control is offering you to win one of four TMCM-1043 development kits for its highly integrated, NEMA 17-compatible TMCM-1043 stepDancer stepper motor module.
Offering designers an easy-to-use PC-based GUI that allows one-click modification of motor drive current, micro-stepping and other key parameters, the intuitive kits are custom designed and developed for direct mounting on a NEMA 17 motor. Pre-programmed and pre-configured with all operating parameters to support standard 1.5A (peak) motors, the TMCM-1043 board uses Trinamic´s single-axis TMC2660 stepper motor driver IC, which integrates a motor pre-driver and power MOSFETs.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.