High density hot swap front-ends deliver up to 650-W
February 06, 2012 // Paul Buckley
Unipower LLC has introduced the SGH 3000 Series of 650 W, 12 V front-ends designed to satisfy the latest networking and datacom applications that demand smaller size, lower energy consumption and a reduced cost of ownership.
The SGH Series offers a power density of 17.5 W/in³ and efficiency levels to 92%.
Featuring a universal AC input (90 to 264 VAC) with minimum power factor greater than 0.95, they provide 12 VDC and a 5 V standby outputs from a 1U high package. N+N redundant operation is achieved with active load sharing and ORing protection circuitry. A Class B EMI filter is also standard.
In addition, the new Front-Ends incorporate both analog and PMBus communication for status control of each power module as well as LED indicators and audible alarms to communicate status or fault conditions.
Measuring 11.81 x 1.99 x 1.57 inch (300 x 50.5 x 40 mm), Unipower’s SGH3000 Series Front-Ends feature an operating temperature range of 0 to +50ºC and variable speed cooling fans.
Like all Unipower products, the SGH3000 Series comes with a two year warranty.
Visit Unipower at www.unipowerco.com
Tower makes IR sensor for Intel RealSense
March 04, 2015
Foundry Tower Semiconductor Ltd., which trades as TowerJazz, has begun mass production of a near infrared light sensor used ...
Polymer blend improves solar cell efficiency by 200 percent
Stress tracker tames drivers
Glass coated cathode promises lithium-sulfur battery performance gains
Femtocell improves in-car mobile connectivity
Study: Autonomous driving changes cities and auto industry
March 03, 2015
The driverless car will have a disruptive effect on the automotive industry as we know it. A study from management consulting ...
Cisco, Deutsche Telekom and Intel to help IoT startups
Opinion: The NXP/Freescale takeover and automotive electronics
Parrot takes instant 3D mapping to the sky
- High Performance Portable DC Bench Power Supply: Save Money and Free Up Bench Real Estate by Building Your Own
- Software-Defined Radio Handbook
- A Four-Quadrant DC/DC Switching Regulator Smoothly Transitions from Positive to Negative Output Voltages for FPGA and Other Applications
- LED Driver with Integrated Spread Spectrum Reduces EMI without Adding Flicker
InterviewInfineon: CAN FD success goes at the expense of FlexRay
The faster version of the venerable CAN bus, CAN FD is currently taking off at several carmakers. Infineon's Thomas Böhm, Head of Body / Automotive, believes this could well go at the expense of FlexRay. ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
To ensure you have a good start in 2015, Freescale is giving away five of its QorIQ TWR-LS1021A Tower system modules, worth USD269 each, for EETimes Europe's readers to win.
The module is the most feature-rich and high-performance Tower system offered by Freescale, enabling compatibility and interoperability with the growing list of Tower expansion modules, offering an easily accessible...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.