Industry's smallest active clock generator ICs reduce EMI issues in portable applications
October 14, 2011 // Paul Buckley
ON Semiconductor has introduced a new series of active clock generator ICs that manage electromagnetic interference (EMI) and Radio Frequency Interference (RFI) at the clock source, delivering system-wide EMI reduction of all clock dependent signals.
The new P3MS650100H and P3MS650103H LVCMOS peak EMI reduction clock generators are ideal for use in space constrained applications such as portable, battery powered devices – including mobile phones and tablets where EMI/RFI can be a challenge and compliance with regulations is a pre-requisite.
Housed in a miniature four-pin WDFN package measuring 1 mm x 1.2 mm x 0.8 mm, these versatile new devices are spread spectrum clock generators that claim to provide the industry’s smallest standalone active solution for reducing EMI/RFI at the clock source as well as downstream clock and data signals derived from the clock source.
The P3MS650100H and P3MS650103H support input voltages ranging from 1.8 V to 3.3 V, typical deviations of 0.45 percent to 1.4 percent, and reduction of EMI/RFI in clock sources with a frequency range of 15 MHz) to 60 MHz. Operating temperature range is -20 to +85 ºC.
More ICs from this family targeting various frequency ranges and deviations are planned for release in Q1,2012
The P3MS650xxxH is offered in a four-pin WDFN package and is priced at $0.37 per unit in 10,000 unit quantities.
Visit ON Semiconductor at www.onsemi.com
Biodegradable electronics debut
July 03, 2015
Today our landfills are being overrun by discarded electronic devices fabricated on silicon substrates that do not biodegrade ...
Power magnetics Lab Kit enters education
Automotive software design: new challenges through multiprocessing
Ultrasound sensor protects pedestrians
Dielectric material helps keep LED packages much cooler
PowerChip plans Chinese fab for display, sensor ICs
July 02, 2015
A former DRAM vendor, now foundry, is joining a trend towards supporting manufacturing in China, according to local reports. ...
XeThru Bot simulates breathing for sensor testing: built from Lego
Sony to raise $3.6bn to speed reinvention as component company
Startup's tech is Intel's Quark neural network
- Critical Requirements in High Speed Signal Generation Applications
- The 400XAC Series: Two Major Advantages that Simplify Functional Testing
- A Smart Way to Drive ECU Consolidation
- Autonomous Driving: An Eye on the Road Ahead
InterviewCEO interview: Cadence is about enablement, collaboration
EDA companies are being asked to provide expertise from the circuit- to the system-level observes Lip-Bu Tan, CEO of EDA software vendor Cadence Design Systems Inc. Covering such a breadth of endeavour ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Novelda is giving away two full XeThru Inspiration kits worth 1499 US Dollars each, for EETimes Europe's readers to experiment first hand with its XeThru technology.Based on the use of radio waves, rather than infrared, ultrasound or light, the company's X2M1000 Inspiration modules can detect presence just from the chest movement while breathing, and measure both the rate and... MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.