J1772 electric vehicle connector specified to use AC Level 1 and Level 2 charging
April 12, 2012 // Julien Happich
ITT Interconnect Solutions has released its 2nd generation J1772 Electric Vehicle (EV) connector for the charging of all electric and hybrid vehicles.
Following substantial R & D investment the J1772 connector has been specified to use AC Level 1 and Level 2 charging for use with EV, EVSE and plug-in hybrid electric (PHEV) vehicles. The charging system is built in accordance with SAE standard J1772 201001 (current revisions) which is approved by regional test laboratories worldwide. Consisting of the J2CE Connector and the J2IV inlet, the system is designed for a minimum of 10,000 cycles of mechanical operation and meets UL50 Type 3R/3S sealing for weather protection.
The connector features a new streamlined shape with an ergonomic handle, textured for improved grip, an important design factor as EV drivers handle the connector on a daily basis. The connector can accommodate an extended range of cables to satisfy the different regional preferences of the world. The ITT ICS connector is capable of delivering a 75A charge, which results in far faster charging time - less that half that of offerings from other industry suppliers, claims the manufacturer.
Visit ITT Interconnect Solutions at www.ittcannon.comAll news
Indian fab project hires former GloFo exec
August 01, 2015
Indian foundry fab will be located near Indore in Madhya Pradesh. The company reports that talks are moving the project forward ...
OmniVision shareholders approve Seagull takeover
Ancient RF teardown: crude but effective
Omnifocal eye-glasses need two-year's development
Is 3D XPoint based on phase-change memory?
Google Glass refocuses on enterprises, circumvents privacy issues
July 31, 2015
According to the Wall Street Journal, Google Glass has been relooked to and redesigned with a bigger display and a faster ...
IoT wireless sensors and the problem of short battery life
High speed DAC for wide bandwidth signal generation
IBM's Watson to help CVS manage patient health data
- Dual Phase Buck Controller Drives High Density 1.2V/60A Supply with Submilliohm DCR Sensing
- Test environment for the positioning elements of wearable devices
- Automotive Circuit Protection using Littelfuse Automotive TVS Diodes
- Top 5 Challenges for testing Today's Consumer Electronics
InterviewGlobalfoundries' CEO on why FD-SOI and why now
With its latest news Globalfoundries Inc. has not only confirmed itself as a supporter of the fully-depleted silicon-on-insulator (FD-SOI) approach to IC manufacturing but that it also thinks sufficiently ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Novelda is giving away two full XeThru Inspiration kits worth 1499 US Dollars each, for EETimes Europe's readers to experiment first hand with its XeThru technology.Based on the use of radio waves, rather than infrared, ultrasound or light, the company's X2M1000 Inspiration modules can detect presence just from the chest movement while breathing, and measure both the rate and... MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.