LED illuminated pushbutton switches can display two different messages
New Products
|
By
eeNews Europe
As an example, an “ON” message can be displayed if the green LED is powered, while an “OFF” message is shown if the red LED is powered. The LP10 pushbutton switches are through-hole mounted, SPST (Off-Mom) switches with a minimum lifetime of 500,000 cycles. Actuation force is 160gf ±20gf and actuation travel is just 0.25mm +0.2/-0.1mm. Measuring 10x10mm with a height off the PCB of just 11mm, LP10 pushbutton switches features silver plated contacts and terminals rated at 24VDC / 50mA and a maximum contact resistance of 100mOhm. Operating temperature range is -25ºC to +70ºC.
Visit Knitter Switch at www.knitter-switch.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
