Li-Ion battery charger targets next generation power efficiency demands
August 29, 2012 // Paul Buckley
ON Semiconductor has introduced a fully programmable Lithium-Ion (Li-Ion) switching battery charger optimized for power efficiency in smart phones, tablets and other handheld devices. The NCP1851 reduces charge time, increases battery life and includes advanced startup features.
With 1.6 A charging capability, the device is perfectly sized at 2.2 x 2.55 mm for the latest USB compliant input supplies and large battery capacities and can complete a full charge cycle of a 1650 mAh, 4.2 V Li-Ion battery in 90 minutes.
The NCP1851 integrates dynamic power path management which enables instant system turn-on in case of a weak battery and helps replenish a deeply discharged battery. Both the device’s internal junction temperature sensor and external Negative Temperature Coefficient (NTC) thermistor ensure safe charging of the system by reporting dedicated interrupts to the I²C Control Bus. The NCP1851 provides a USB On-the-Go (OTG) mode that boosts battery voltage to power accessories plugged into the USB port, eliminating the need for another step-up converter.
Packaging and Pricing
The NCP1851 is housed in a 25 bump Flip-Chip CSP package case with overall dimensions of a mere 2.2 mm x 2.55 mm and height of 0.6 mm maximum. The device is priced at $1.25 per unit in 3,000 quantities.
Visit ON Semiconductor at www.onsemi.com
Ten deals that shaped analog, MEMS and sensors in 2014
December 22, 2014
The company merger and acquisition trend that characterized 2013 was still present in 2014 but was, perhaps, slightly less ...
Silicon more-than-Moore to drive MEMS, RF, LEDs
Goepel expands collaboration network in Asia
Alstom partners NTU Singapore to develop microgrid solution
Graphene oxide discovery helps boost rechargeable batteries
Endoscopic measurement method allows quieter, more reliable jet engines
December 21, 2014
A team of scientists from German aerospace research centre DLR has developed an optical measurement method that enables direct ...
Pathway to converting sunlight to electricity is indentified
How industrial IoT will drive the MEMS market indirectly
Successful with phones & drones, Parrot ponders farming
- New life for Embedded systems in the Internet of Things
- Virtualization and the Internet of Things
- RF/Microwave Instrumentation “S” Series Amplifiers
- Application Guide to RF Coaxial Connectors and Cables
InterviewCEO interview: Bosch's IoT startup is all about the system
Thorsten Mueller, CEO of Bosch Connected Devices and Solutions GmbH (Reutlingen, Germany), has been guiding the latest startup subsidiary of Robert Bosch GmbH since 2013 when he started the initiative ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Arrow Electronics is giving away ten BeMicro Max 10 FPGA evaluation boards together with an integrated USB-Blaster, each package being worth 90 Euros, for EETimes Europe's readers to win.
Designed to get you started with using an FPGA, the BeMicro Max 10 adopts Altera's non-volatile MAX 10 FPGA built on 55-nm flash process.
The MAX 10 FPGAs are claimed to revolutionize...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.