Lightfair: NXP gets serious about Internet-enabled smart lighting
May 16, 2012 // Christoph Hammerschmidt
What if every light bulb had an Internet IP address? Since NXP Semiconductors N.V. first raised the question at Lightfair International (LFI) nearly one year ago, interest in IPv6-enabled smart lighting has soared. The potential energy and cost savings – as well as the comfort, convenience and lifestyle benefits for the consumer – have mobilized a growing ecosystem of innovators in lighting, connectivity, energy management and home automation to enable and support wirelessly controlled intelligent lighting.
Past week at LFI 2012 in Las Vegas, NXP showcased two wireless smart lighting solutions based on IEEE 802.15.4 standards, including:
- JenNet-IP network layer software for the Internet of Things. Based on the open 6LoWPAN standard, JenNet-IP is fully IPv6-compliant, and makes it possible to extend secure connectivity, two-way communication and control to a broad network of up to 500 devices in the home. Supported by an open ecosystem including lamp manufacturers such as TCP, Inc. and Leedarson, gateway manufacturers such as Belkin, and energy management solutions provider GreenWave Reality, JenNet-IP is helping to drive down the cost of adding “smart” functionality into devices ranging from light bulbs to air-conditioning systems – and enabling interoperability with other communication standards in the home. In Q3, NXP will launch a certification program for JenNet-IP, and will be delivering its first JenNet-IP evaluation systems. Later this year, NXP will also announce its roadmap for the open-source release of JenNet-IP, as well as the retail availability of the first Internet-enabled lamps.
- ZigBee Light Link. NXP today announced that it has achieved product certification for a ZigBee Light Link Color Scene Remote Control and an Extended Color Light. Both products are based on the JN5148-001 single-chip wireless microcontroller which has been certified as a ZigBee Compliant Platform and is a suitable development platform for the various ZigBee profiles. NXP supports ZigBee Light Link as a solution for smaller, short-range, room-based lighting applications with plug-and-play functionality.
“While the 'smart home' as a concept has been around for decades, it has traditionally remained in the domain of luxury homes. Now the availability of Internet-enabled light bulbs at a compelling price point – and the potential to connect lighting to a broader network of hundreds of devices – are helping to bring the smart home mainstream,” said Sean McGrath, general manager, smart home and energy product line, NXP Semiconductors. “We envision that the smart home of the not-so-distant future will have a mixed network topology, including high-bandwidth nodes using Wi-Fi, alongside ultra-low-power JenNet-IP nodes using only one-tenth the power. By also supporting ZigBee, we remain committed to promoting interoperability in a more affordable, more accessible smart home environment.”
Additional demos by NXP at LFI 2012 included solutions for a wide range of lighting applications, including:
- New development platforms for wired lighting control systems using DALI for commercial lighting networks and DMX512 for architectural and entertainment lighting, powered by NXP's low-cost, extra-low-power 32-bit ARM Cortex-M0 microcontrollers (LPC1100XL)
- High-efficiency SSL drivers for both dimmable and non-dimmable LEDs, for retrofit as well as non-retrofit lamps, based on GreenChip technology – including the latest SSL2109 and SSL21101 driver ICs
- Higher-power LED solutions for high bay and low bay lights in commercial and industrial applications, as well as street lighting
- Plasma street lighting, powered by NXP's solid-state RF technology – which can also be wirelessly controlled.
Further information on NXP solutions for lighting applications is available at http://www.nxp.com/applications/lighting/
Advanced batteries reached $10.8bn in market value in 2012, reports Navigant Research
December 05, 2013
Worldwide sales of advanced batteries totaled $10.8 billion in 2012 which is an increase over 2011 reports market intelligence ...
Composite human-computer interface allows multiple devices to share and coordinate their interactions
Sony eyes Renesas fab for sensors
Transphorm acquires Fujitsu's GaN power conversion business
Image sensors manufacturer CMOSIS to be acquired by TA Associates
AMETEK acquires power management systems provider Powervar
December 05, 2013
AMETEK, Inc. has acquired Powervar, a leading provider of power management systems and uninterruptible power supply (UPS) ...
Volvo starts large test with robot cars on public roads
Gartner: Qualcomm, Micron rise in 2013 chip market
Connected Lighting Alliance focuses on shaping indoor professional lighting standards
- 3mm × 3mm QFN IC Directly Monitors 0V to 80V Supplies
- UltraCMOS® Semiconductor Technology Platforms: A Rapid Advancement of Process & Manufacturing
- Adaptive Cell Converter Topology Enables Constant Efficiency in PFC Applications
- Isolated 4-Channel, Thermocouple/RTD Temperature Measurement System with 0.5°C Accuracy
InterviewPerformance monitoring solution helps provide intelligent control of high power systems
A performance monitoring solution designed to enable companies to monitor high power IGBT module systems in locomotive, wind turbine, High Voltage DC and industrial drive applications was unveiled this ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
Internet of Things (IoT) manufacturer Ciseco has launched the Raspberry Pi ‘Wireless Inventors Kit’ (RasWIK), featuring 88 pieces to provide everything a Pi owner needs to follow a series of step-by-step projects or to create their own wireless devices, without the need for configuration or even writing code.
RasWIK has been designed to be highly accessible, demystifying the dark art of wireless and enabling anyone with basic computing skills to begin building wireless devices with a Raspberry Pi. You can create anything from a simple traffic light, to a battery monitor, or even a temperature gauge that sends data to the Xively IoT cloud so billions can access the data.This month, Ciseco is giving away twelve Raspberry Pi Wireless Inventors kits, worth £49.99 each for EETimes Europe's readers to win.
And the winners are...
In our previous reader offer, Farsens was giving away five kits for EEtimes Europe readers to evaluate its FenixVortex, Kineo and X1 wireless, battery free sensor tags.
Lucky winners include Mr A. Neil from the UK, Mr. E. Delvaux from Belgium, Mr Lengal from the Czech Republic, Mr H. Bijlsma from the Netherlands, and Mr G. Pfaff from Germany. All should be receiving their packages soon. Lets wish them some interesting findings with their projects.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.