Multi-function JTAG module focuses on analog testing
The JT 2149/DAF module has been designed to slot into JTAG Technologies’ regular QuadPod transceiver system as used by the DataBlaster series of boundary-scan/JTAG controller hardware. When connected to a circuit board via edge connector or test fixture/jig test pins the module enhances standard digital boundary-scan tests by enabling a series of analog and frequency measurements to be made.
Capabilities of the JT 2149/DAF module include 16 dual-purpose digital pins capable of digital I/O stimulus and response at voltages of 1.0 to 3.6 V plus frequency measurements of up to 128 MHz on any pin. 12 additional analog measurement channels can capture values from 0 to 33 V with better than 10 mV resolution. One further channel is available as a clock generator, programmable up to 64 MHz.
The JT 2149/DAF can be controlled through an interactive panel (virtual instrument) within JTAG ProVision as well as through Python scripts. A full Python API is included as part of JTAG Technologies current ProVision releases.
The modules are available immediately.
Visit JTAG Technologies at www.jtag.co.uk
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
