Multi-purpose tube cases made from aluminium with integral guide slots
February 17, 2012 // Julien Happich
The wide variety of cases offered by Fischer Elektronik has now been extended to include four new versions of Frame design case. These multi-purpose tube cases made from aluminium have integral guide slots and serve to accommodate non-standard PCBs or components.
The shock-proof plastic covers as well as the integral slip-resistant feet mean the user can opt to use the design case as a desktop case or as a handheld case. Thanks to the special geometry of the aluminium tube profile, the case can have either foil key pads or front foils. In the standard version, the case is available in seven lengths (50 mm, 80 mm, 100 mm, 120 mm, 160 mm, 200 mm and 220 mm) and with three different surface designs. An EMC-compliant design can be achieved by using electrically conductive surfaces. On request, the aluminium tube profile as well as the covers can be machined, surface-treated, and imprinted. In addition to the standard colour (which is similar to RAL 1007), the plastic covers are available in many other RAL colours. The Frame design case comes as a disassembled kit, including covers and mounting material.
Visit Fischer Elektronik at www.fischerelektronik.deAll news
Thin film solar cells may rival silicon
July 07, 2015
A consortium of eleven European partners in eight countries claims to have an effcient alternative to silicon that achieves ...
3D printing for photonics: a British initiative
It's crunch time (again) for EUV lithography
Digi-Key to distribute Monolithic Power Systems worldwide
Autonomous taxis would be green and cost effective says study
What she sees is what you get
July 06, 2015
360º video is an ongoing experiment, something that's technically feasible, yet whose consumer use-cases are not quite well ...
Prototyping in silicon photonics boosted by European collaboration
Private equity makes moves on GaN startup
TSMC overtakes Intel in chip capex ranking
- Critical Requirements in High Speed Signal Generation Applications
- The 400XAC Series: Two Major Advantages that Simplify Functional Testing
- A Smart Way to Drive ECU Consolidation
- Autonomous Driving: An Eye on the Road Ahead
InterviewCEO interview: Cadence is about enablement, collaboration
EDA companies are being asked to provide expertise from the circuit- to the system-level observes Lip-Bu Tan, CEO of EDA software vendor Cadence Design Systems Inc. Covering such a breadth of endeavour ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Novelda is giving away two full XeThru Inspiration kits worth 1499 US Dollars each, for EETimes Europe's readers to experiment first hand with its XeThru technology.Based on the use of radio waves, rather than infrared, ultrasound or light, the company's X2M1000 Inspiration modules can detect presence just from the chest movement while breathing, and measure both the rate and... MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.