Multipoint LVDS transceivers offer 8 kV IEC ESD protection
May 11, 2012 // Julien Happich
Analog Devices' multipoint, low-voltage, differential signalling ADN469xE M-LVDS series includes eight transceivers, each of which is capable of connecting 32 data/clock nodes using a single differential cable pair at data rates of 100 Mbps or 200 Mbps.
Traditional LVDS communication links, by comparison, must use 32 separate point-to-point nodes, which significantly increases power, connector size, cabling costs and total board space. ADI's ADN469xE M-LVDS series delivers 8 kV IEC ESD protection, offering up to 11 times the protection of competing M-LVDS transceivers. This higher level of protection improves the reliability of insertable/removable boards and cards used in wireless base station and networking infrastructure, data acquisition, automated test equipment and other high-speed, highly networked backplane and cable applications. Available in half- and full-duplex versions, ADI’s ADN469xE transceivers are fully compliant with the TIA/EIA-899 M-LVDS standard.
The new transceivers are available in configurations that include Type 1 receivers with 200 Mbps data rates include symmetrical input threshold voltage (ADN4691E/ADN4693E) designed to improve clock timing performance, and Type 2 receivers with 200 Mbps data rates (ADN4696E/ADN4697E) designed for data applications and feature a receiver-input threshold voltage offset of –100 mV. This ensures a known receiver output state when the bus is idle (bus-idle fail-safe) or the bus inputs are open (open-circuit fail-safe). The devices operate in the –40 to 85˚C temperature range.
Visit Analog Devices at www.analog.comAll news
Switch to LED lighting cuts cruising energy costs by 60 percent
February 27, 2015
Europe’s leading holiday cruise company, Costa Cruises has upgraded ten of the company's fleet of cruise liners with more ...
Semitrex' ultimate goal: "one size fits all" power conversion
Porsche rainmaker advocates platooning
Radar-based sensor network helps drivers finding a parking spot
Xilinx flexes its muscles in the ADAS arena
The future of custom ASICs
February 26, 2015
With the prevailing view that Moore's Law is slowing Donnacha O’Riordan, director of services strategy for S3 Group, gives ...
Dual nanowire structure absorbs light efficiently
5 trends to watch at Mobile World Congress
Infineon: CAN FD success goes at the expense of FlexRay
- Software-Defined Radio Handbook
- A Four-Quadrant DC/DC Switching Regulator Smoothly Transitions from Positive to Negative Output Voltages for FPGA and Other Applications
- LED Driver with Integrated Spread Spectrum Reduces EMI without Adding Flicker
- Accelerate SDN and NFV with Off-the-Shelf Software
InterviewInfineon: CAN FD success goes at the expense of FlexRay
The faster version of the venerable CAN bus, CAN FD is currently taking off at several carmakers. Infineon's Thomas Böhm, Head of Body / Automotive, believes this could well go at the expense of FlexRay. ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
To ensure you have a good start in 2015, Freescale is giving away five of its QorIQ TWR-LS1021A Tower system modules, worth USD269 each, for EETimes Europe's readers to win.
The module is the most feature-rich and high-performance Tower system offered by Freescale, enabling compatibility and interoperability with the growing list of Tower expansion modules, offering an easily accessible...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.