Power Components Simplify 1kW Power Design
June 04, 2012 // Jeff Ham, Vicor // 0 commentsDownload White Paper 442Ko
Not long ago, designing a 1,000 W power supply for operation on worldwide AC lines was a task for the most experienced power design engineers. Besides dealing with the design of autoranging front-end rectification circuitry and isolated power conversion stages, the designer faced a myriad of other complex technical and design issues: inrush current limiting, sizing and selection of holdup capacitors, transient protection, thermal design, and worldwide safety agency and conducted noise requirements.
Most popular PapersRead more
Solutions that Integrate BioCompatic: Class VI Silicone cable assembly
March 16, 2015 | Northwire, Inc. | 222924176
Accelerate SDN and NFV with Off-the-Shelf Software
January 31, 2015 | Intel Intelligent Systems | 222923680
- The Revolution Resolution in Medical Imaging
- Smart Capacitive Design Tips
- Wireless MCUs and IoT
- Low Power Bi-directional Level Shifter
InterviewInfineon: CAN FD success goes at the expense of FlexRay
The faster version of the venerable CAN bus, CAN FD is currently taking off at several carmakers. Infineon's Thomas Böhm, Head of Body / Automotive, believes this could well go at the expense of FlexRay. ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, DecaWave is offering EETimes Europe's readers the chance to win two TREK1000 kits to evaluate its Ultra-Wideband (UWB) indoor location and communication DW1000 chip in different real-time location system topologies.
Worth €947, the kit allow designers to prove a concept within hours and have a prototype ready in days. Based on the two-way ranging scheme, the kit lets you test three different topologies.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.