Print  |  Send  |   

Proper use of Field Analyzers at Lower Frequencies

March 20, 2014 // Acoustic Research // 0 comments

Proper use of Field Analyzers at Lower Frequencies Download White Paper 421Ko

Most RF field probes are designed to measure only the root mean square (RMS) of a continuous wave (CW) electric field over a broad range of frequencies and amplitudes. This is not the case for the AR Field Analyzer. The AR Field Analyzer contains an embedded web-page that has the ability to measure CW and Modulated electric field or power density in the time domain using an oscilloscope-type display.


All White Papers


Submit a white paper

Follow us

Fast, Accurate & Relevant for Design Engineers only!

Technical papers     

Linear video channel

READER OFFER

Read more

This month, Future Electronics has 20 of Intersil's ISL8203MEVAL2Z evaluation boards to give away to EETimes Europe's readers. Worth 95 US dollars, the board was designed to demonstrate the performance of the ISL8203M dual step-down power module which integrates a PWM controller, synchronous switching MOSFETs, inductors, and passives all in a 9.0x6.5x1.83mm package.

The ISL8203M is rated for dual 3A output current or 6A current sharing operation with an input range of 2.85V to 6V. Each of the two channels employs the current mode pulse width modulation scheme for fast transient response and pulse-by-pulse current limiting.

MORE INFO AND LAST MONTH' WINNERS...

Design centers     

Automotive
Infotainment Making HDTV in the car reliable and secure

December 15, 2011 | Texas instruments | 222901974

Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.

 

You must be logged in to view this page