Print  |  Send  |   

SD and HD video development platform based on low-cost Altera FPGA

June 22, 2012 // Julien Happich

SD and HD video development platform based on low-cost Altera FPGA

SingMai Electronics has introduced a range of low cost boards targeted at SD and HD video development, based around an Altera EP3C25 Cyclone III FPGA which has the sufficient resources to run all of the SingMai video IP cores.


The DP5-A is also bundled with an unlimited use/time license for the SingMai PT13 compact microprocessor IP core for all Altera FPGAs. The main board can accept up to three add-ons boards. Boards available include analogue and digital interfaces, including NTSC/PAL, YPbPr or RGB analogue component video at either SD or HD resolutions, HDMI/DVI and SDI/HD-SDI interfaces. Each board is also provided with Verilog example code and software drivers for the PT13. Additional boards include a QVGA LCD display panel and interface, a CMOS image sensor interface for both SD and HD sensors and fast ADC and DAC cards for the acquisition and display of non-standard video. A range of user interfaces for user control is also provided, including an 8x2 character backlit LCD display, a digital encoder, switches and an IR remote control sensor.

The development platform is also supported with the SingMai range of video IP cores including analogue video decoders and encoders, 3D video noise reduction, video pattern generators and character overlays and a complete suite of image processing functions for use with the CMOS image sensors.


Visit SingMai Electronics at www.singmai.com

All news

Development Kits,Boards & Embedded Cards,PLDs/FPGAs/ASICs

Follow us

Fast, Accurate & Relevant for Design Engineers only!

Technical papers     

Filter Wizard     

Check out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.

Linear video channel

READER OFFER

Read more

This month, Trinamic Motion Control is offering you to win one of four TMCM-1043 development kits for its highly integrated, NEMA 17-compatible TMCM-1043 stepDancer stepper motor module.

Offering designers an easy-to-use PC-based GUI that allows one-click modification of motor drive current, micro-stepping and other key parameters, the intuitive kits are custom designed and developed for...

MORE INFO AND LAST MONTH' WINNERS...

Design centers     

Automotive
Infotainment Making HDTV in the car reliable and secure

December 15, 2011 | Texas instruments | 222901974

Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.

 

You must be logged in to view this page

Login here :