Space saving high-current inductor offers high-performance benefits
August 08, 2011 // Paul Buckley
Vishay Intertechnology, Inc., has launched a new IHLP low-profile, high-current inductor in the 3232 case size with an ultra-low 3.0 mm profile. The compact IHLP-3232CZ-01 offers high efficiency with maximum DCR down to 1.61 mΩ and a wide range of standard inductance values from 0.22 µH through 10.0 µH.
With a frequency range up to 5 MHz, the IHLP-3232CZ-01 serves as a high-performing, space- and power-saving solution for voltage regulator module (VRM) and dc-to-dc converter applications in end products including next-generation mobile devices; notebooks, desktop computers, servers, graphic cards, portable gaming systems, personal navigation systems, personal multimedia devices, and automotive systems; low-profile, high-current power supplies and point of load (POL) converters; distributed power systems; and field-programmable gate arrays (FPGAs).
The IHLP-3232CZ-01 offers an inductance range from 0.22 µH to 10.0 µH, a saturation current range from 8.2 A up to 43.0 A, a heat rating current range from 4.7 A to 32.0 A, and maximum DCR from 1.61 mΩ to 71.20 m Ω.
The new inductor handles high transient current spikes without hard saturation. Packaged in an RoHS-compliant, 100 % lead (Pb)-free shielded, composite construction that reduces buzz noise to ultra-low levels, the device is specified for an operating temperature range of - 55 °C to + 125 °C, with high resistance to thermal shock, moisture, mechanical shock, and vibration.
Samples and production quantities of the new inductor are available now, with lead times of 10 weeks for large orders.
Visit Vishay Intertechnology at www.vishay.com.
Biodegradable electronics debut
July 03, 2015
Today our landfills are being overrun by discarded electronic devices fabricated on silicon substrates that do not biodegrade ...
Power magnetics Lab Kit enters education
Automotive software design: new challenges through multiprocessing
Ultrasound sensor protects pedestrians
Dielectric material helps keep LED packages much cooler
PowerChip plans Chinese fab for display, sensor ICs
July 02, 2015
A former DRAM vendor, now foundry, is joining a trend towards supporting manufacturing in China, according to local reports. ...
XeThru Bot simulates breathing for sensor testing: built from Lego
Sony to raise $3.6bn to speed reinvention as component company
Startup's tech is Intel's Quark neural network
- Critical Requirements in High Speed Signal Generation Applications
- The 400XAC Series: Two Major Advantages that Simplify Functional Testing
- A Smart Way to Drive ECU Consolidation
- Autonomous Driving: An Eye on the Road Ahead
InterviewCEO interview: Cadence is about enablement, collaboration
EDA companies are being asked to provide expertise from the circuit- to the system-level observes Lip-Bu Tan, CEO of EDA software vendor Cadence Design Systems Inc. Covering such a breadth of endeavour ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Novelda is giving away two full XeThru Inspiration kits worth 1499 US Dollars each, for EETimes Europe's readers to experiment first hand with its XeThru technology.Based on the use of radio waves, rather than infrared, ultrasound or light, the company's X2M1000 Inspiration modules can detect presence just from the chest movement while breathing, and measure both the rate and... MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.