SPI FRAMs in 0.18µm technology up to 256Kbit
July 01, 2011 // Julien Happich
Fujitsu Semiconductor Europe is sampling customers with the new SPI FRAMs based on its 0.18µm technology. With this step, Fujitsu approaches the end of the migration process from 0.35 to 0.18µm technology achieving the industry-leading FRAM performance with E2PROM compatible package.
FRAM (Ferroelectric Random Access Memory) combines the advantages of fast writing SRAM with non-volatile Flash into one device. The new SPI FRAM family MB85RSxxx incorporates three devices: MB85RS256A, MB85RS128A and MB85RS64A, which represent three density levels of 256Kbit, 128Kbit and 64Kbit respectively. All devices operate at a voltage range between 3.0 and 3.6V and provide an endurance of 10 billion write/read cycles as well as data retention of 10 years at 55°C. Operating frequency has been significantly increased to a maximum of 25MHz, and since FRAM products render voltage boosters unnecessary for the writing process, they are well-suited for low power applications. The products are offered in 8-pin plastic SOP packages with standard memory pin assignment, which are fully compatible with E2PROM devices.
Visit Fujitsu Semiconductor Europe at http://emea.fujitsu.com/fram
OmniVision, eyeSight, push gesture towards the smartphone
March 02, 2015
CMOS image sensor vendor OmniVision Technologies Inc. is collaborating with software company eyeSight Technologies Ltd. to ...
Fraunhofer, Nokia jointly run LTE-A testbed
NXP, Freescale plan mega merger
Semitrex' ultimate goal: "one size fits all" power conversion
Graphene polymer speeds electron transport
Samsung phones pack 14nm SoC
March 02, 2015
Samsung will pack a handful of new technologies -- including a 14nm Exynos applications processor -- into its new Galaxy ...
Benchmark Stresses Big Chips
Consortium releases digital point-of-load specification
Can flow battery advance lower urban power costs?
- Software-Defined Radio Handbook
- A Four-Quadrant DC/DC Switching Regulator Smoothly Transitions from Positive to Negative Output Voltages for FPGA and Other Applications
- LED Driver with Integrated Spread Spectrum Reduces EMI without Adding Flicker
- Accelerate SDN and NFV with Off-the-Shelf Software
InterviewInfineon: CAN FD success goes at the expense of FlexRay
The faster version of the venerable CAN bus, CAN FD is currently taking off at several carmakers. Infineon's Thomas Böhm, Head of Body / Automotive, believes this could well go at the expense of FlexRay. ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
To ensure you have a good start in 2015, Freescale is giving away five of its QorIQ TWR-LS1021A Tower system modules, worth USD269 each, for EETimes Europe's readers to win.
The module is the most feature-rich and high-performance Tower system offered by Freescale, enabling compatibility and interoperability with the growing list of Tower expansion modules, offering an easily accessible...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.