Using Next Generation Power Firmware to Simplify Energy Star Compliant Designs
December 18, 2013 // Ron Vinsant, Exar // 0 commentsDownload White Paper 1Mo
Exar’s PowerXR programmable power management system provides a cost effective and easy to change solution for ENERGY STAR rated products both in the USA and worldwide. The ability to configure the power system via an easy to use GUI allows ENERY STAR compliance to be quickly achieved for idle and standby modes.
Even as late as 2007, different countries have had different views as to how to address the need for driving manufacturers to design more power efficient products. In order to promote trade a common set of specifications, procedures and labeling have been created by many countries so that consumers can readily identify the efficiency of various products.
Most popular PapersRead more
Flexible Performance for Network Security Appliances
August 30, 2014 | Pomah Yen, Chief Product Manager, CASwell Inc., a Subsidiary of Portwell | 222922199
Building Blocks for the Internet of Things
August 01, 2014 | Kumar Balasubramanian, Intelligent Solutions, Intel® Corporation | 222921947
- Power Modules: The New Super Power
- Flexible Performance for Network Security Appliances
- Digital Power Management Reduces Energy Costs While Improving System Performance
- How to Charge Supercapacitor Banks for Energy Storage
InterviewA question of Europe
Sir Peter Bonfield sits on the board and has advisory roles in many international companies and universities. With more than 45 years of experience in electronics, computers and communications, here he ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Trinamic Motion Control is offering you to win one of four TMCM-1043 development kits for its highly integrated, NEMA 17-compatible TMCM-1043 stepDancer stepper motor module.
Offering designers an easy-to-use PC-based GUI that allows one-click modification of motor drive current, micro-stepping and other key parameters, the intuitive kits are custom designed and developed for direct mounting on a NEMA 17 motor. Pre-programmed and pre-configured with all operating parameters to support standard 1.5A (peak) motors, the TMCM-1043 board uses Trinamic´s single-axis TMC2660 stepper motor driver IC, which integrates a motor pre-driver and power MOSFETs.
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.