Wireless-power coil modules for portable consumer device charging applications
June 22, 2012 // Julien Happich
Luso Electronics Distribution now makes available thin and high-efficiency magnetic-induction coil modules from Elec & Eltek, aimed wireless charging applications for portable electronic devices.
Two standard transmitter (Tx) coil modules are available, respectively offering 19V and 5V wireless power charging, in addition to a receiver (Rx) coil module. The modules are already specified on wireless charging circuit reference designs and evaluation kits from leading semiconductor manufacturers, including TI and IDT. Additionally, these devices are compliant to Wireless Power Consortium (WPC) specifications, which helps designers avoid safety problems and ensures system interoperability.
Available in various operating temperature ranges, specifications of these modules include DCR (Direct Current Resistance) figures of 75 and 25 mOhms (maximum) and an inductance of 24 and 6.3uH (typical) for the 19V and 5V coils, respectively. Specifications for the receiver (Rx) coil module are 210 mOhms (maximum) and 9.7uH (typical). Dimensions of the Tx modules are 50 x 50mm; the Rx module is 48 x 32mm. Alternative electrical specifications, in addition to various coil shapes and dimensions are also available for custom designs.
Visit Luso Electronics at www.lusoelectronics.comAll news
Tactical panoramic video ball creeps in
June 29, 2015
Boston-based startup Bounce Imaging is about to release its first line of tactical panoramic video softballs, a WiFi-capable ...
Conductive ink turns textiles into stretchable electronics
Apple Watch tear down reveals European chips
GlobalFoundries’ FD-SOI revolution
Exploring through-wall presence detection
Scottish bacteria-killing light fixture targets US healthcare market
June 29, 2015
Kenall Manufacturing has introduced a light fixture developed by Scotland's University of Strathclyde that uses Continuous ...
'Skin-like' full-color display can be applied to plastics, fabrics
Bosch graphene-based sensor: 100x more sensitive than silicon equivalent
Wafer-level packaging is not enough, say OSATS
- The 400XAC Series: Two Major Advantages that Simplify Functional Testing
- A Smart Way to Drive ECU Consolidation
- Autonomous Driving: An Eye on the Road Ahead
- Getting Security Right in Wireless Sensor Networks
InterviewCEO interview: Cadence is about enablement, collaboration
EDA companies are being asked to provide expertise from the circuit- to the system-level observes Lip-Bu Tan, CEO of EDA software vendor Cadence Design Systems Inc. Covering such a breadth of endeavour ...
Filter WizardCheck out the Filter Wizard Series of articles by Filter Guru Kendall Castor-Perry which provide invaluable practical Analog Design guidelines.
Linear video channel
READER OFFERRead more
This month, Future Electronics has 20 of Intersil's ISL8203MEVAL2Z evaluation boards to give away to EETimes Europe's readers. Worth 95 US dollars, the board was designed to demonstrate the performance of the ISL8203M dual step-down power module which integrates a PWM controller, synchronous switching MOSFETs, inductors, and passives all in a 9.0x6.5x1.83mm package.
The ISL8203M is rated for...MORE INFO AND LAST MONTH' WINNERS...
December 15, 2011 | Texas instruments | 222901974
Unique Ser/Des technology supports encrypted video and audio content with full duplex bi-directional control channel over a single wire interface.