MENU

Cypress modernises Traveo MCU product line

Cypress modernises Traveo MCU product line

New Products |
By eeNews Europe



As a key part of the expansion, Cypress introduces the first series of its Traveo microcontroller (MCU) family on the 40nm process technology node. This microcontroller family is based on the ARM Cortex R5 node. Originally developed by Fujitsu, the microcontrollers have been acquired later by Spansion which in turn was taken over by Cypress.

The 40nm implementation enables higher performance and more cost-efficient implementations of instrument clusters, a market segment where in the past years Nvidia evolved as a strong comtender. The 40-nm Traveo series features up to 4MB of high-density embedded flash, meter control, small thin-film transistor (TFT) display control, advanced sound output capabilities and support for many kinds of networking standards for a wide variety of instrument clusters. In addition, a new MCU in the series is optimized for high-end body and gateway control. The 40nm technology will also provide the ability to embed more on-chip flash memory for advanced applications. The 40nm Traveo MCUs will make it easier to implement Firmware Over-The-Air (FOTA) updates, which enable consumers to get new software fixes and features and new applications for their vehicles on-the-go.

Additionally, Cypress introduced a transceiver for the low-speed Clock Extension Peripheral Interface (CXPI) designed to succeed the widely-used Local Interconnect Network (LIN) automotive communication protocol. CXPI is said to help reduce bill-of-material costs and lower fuel consumption by requiring fewer wire harnesses in a vehicle. Cypress claims to be the only supplier to offer a CXPI transceiver and automotive MCUs, enabling a complete solution.

The new 40nm Traveo S6J331X/S6J332X/S6J333X/S6J334X series provides automotive manufacturers with a high-performance and cost-effective platform for classic instrument clusters with small thin-film transistor (TFT) displays. The series is based on the ARM Cortex-R5 processor with 240-MHz performance and supports the Controller Area Network-Flexible Data (CAN-FD) automotive communication protocol for increased data bandwidth for faster networking. The MCUs integrate 4MB of internal flash for application storage, enhanced secure hardware extension (eSHE) for robust security, and the industry-leading HyperBus interface that enables seamless connections with HyperFlash and HyperRAM memories.

Additionally, the Traveo S6J331X/S6J332X/S6J333X/S6J334X series

  • includes a 16-bit Audio-DAC, a multi-channel mixer and I2S interfaces to output the complex, high-quality sounds required in today’s instrument clusters,
  • supports Ethernet AVB for increased bandwidth in multimedia application and reduced programming time, and
  • combines with Cypress’s recently introduced S6BP50x series of automotive PMICs to provide a seamless solution for instrument clusters.

The new 40nm Traveo S6J335X series provides automotive manufacturers with the support for EthernetAVB and a maximum of eight channels for CAN-FD, enabling automotive network gateways. It includes up to 12 channels of Multi-Function Serial (MFS), up to 64 channels of 12-bit ADC inputs, and up to 64 channels of base timers, including PWMs.

The S6BT11X CXPI transceiver series works as the interface between the CXPI datalink controller and the BUS line. S6BT11X can be used to enable ECU communication with speeds going up to approximately 20kbps. The transceiver also has a sleep/wake up control function for low power dissipation, making it reliable and energy efficient.

More information on the Traveo MCU family and automotive portfolio is available at https://www.cypress.com/automotive.

Cypress brings advanced 2D/3D graphics to compact vehicles

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s