High power density thin film modules provide precise temperature stabilization for optoelectronics and laser diodes
The modules are assembled using thin film technology that enables the TEMs to have ten times the heat pumping density per unit area than conventional bulk thermoelectric technology. The ceramic substrates are gold metallized to allow the product to be embedded into densely packed optoelectronics.
The thin film eTEC TEMs have heat pumping densities ranging from 75 to 90 W/cm2 at an ambient temperature of 25°C. The new models include the HV14,18,F0,0101,GG (1.4 W in 1 mm2); HV37,48,F2,0202,GG (3.7 W in 6.9 mm2); HV56,72,F2,0203,GG (4.8 W in 10.2 mm2).
Constructed with Bismuth Telluride thin film technology and thermally conductive Aluminum Nitride ceramics, the eTEC Series is designed for higher voltage and lower, sub 10 Watt heat pumping applications. Other features include RoHS compliance, pending Telcordia Compliance and gold metallization for solder ability to mating substrate surfaces.
Visit Laird Technologies at www.lairdtech.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
