Programmable outdoor LED driver focuses on street lighting benefits

March 25, 2016 // By PAUL BUCKLEY
MSC Technologies is offering the second generation of 100 W Class II programmable outdoor (IP67) LED driver family from Inventronics
MSC Technologies is offering the second generation of 100 W Class II programmable outdoor (IP67) LED driver family from Inventronics. The devices operate with a wide input voltage range of 90~305 VAC with a power factor of 0.96 @ 220 VACin.

The drivers have a standard power default setting but it is possible to set the output power characteristic individual within a range of 60 to 100%, according to different project requirements. The drivers have a high surge protection capability of 10 kV line-line and feature overvoltage protection, short circuit protection as well as over temperature protection.

Device features include Output Lumen Compensation over LED Lifetime (OLC), thermal sensing of the LED Module and an on board auxiliary power supply with 12 V/200 mA for driving external controllers or sensor units. The high efficiency of 93.0% (@220 VACin / Io = 700 mA; TA=25°C) and low standby power of = 0.5 W leads to cooler operation, better reliability and longer lifetime (101 khrs @TA=70°C; 80% load) of the driver and the whole lighting system.

The EUD-100S Series targets general outdoor application especially street lighting as well as tunnel, low bay or similar applications. The drivers are available now.

www.msc-technologies.eu